How to drill porcelain tiles on the floor

Porcelain tile is a unique material for decorating both the floor and walls. Drilling it is quite difficult, since the material is very hard and resistant to any effects. Read further about what tools are needed and how to make a hole in the tile from this material.

What is necessary to drill porcelain tiles in the floor?

To quickly make a hole you need to prepare a specific tool. Better for this task fit drill without shock mode. If there is such a function, then it should be disabled if possible. Otherwise there is the likelihood of damage to the surface. Special tools will be needed:

1. Diamond drill bit. Makes a hole in one minute, which is its undoubted advantage. They are drilled and tile. It also has a long service life and the ability to work dry, they are without a constant pouring of water.
2. Crown with diamond electroplating. This is the most budget and affordable option. In addition, it reduces the pressure and makes it possible to increase the speed and speed of work. Of the minuses distinguish their short life. For example, drill a tile measuring 8 mm. can be about five times. Only suitable for wet cutting.
3. Ring sintering diamond drill. Makes a hole in 3-5 minutes, at a low pace. Creates a large end onslaught, which affects the quality, especially among inexperienced craftsmen.

ATTENTION!Commercially use waterjet technology. Therefore, if you need to make a large number of grooves, it is better to find a specialized organization.

How to make holes

Once the device is selected, you can begin the drilling process. First of all it is important to know that drilling is carried out only on two thirds of the thickness of the product. The rest of the element is knocked out by the rapid movement of the rod. Observe the following guidelines:

• The tool must be kept strictly upright and without strong pressure.
• Work is done only from the front side so that no chips or cracks remain on the surface. After all, the reverse side does not need beauty, and cement mortar will hide all the flaws.
• Using the substrate. In order not to spoil the working surface under the porcelain stoneware enclose a sheet of plywood, chipboard or other wooden material.
• The drill should be brought in the on state so that the drill is already running at maximum speed.
• To prevent the tool from slipping off, you can stick tape on the tile surface.
• For simplicity, you should draw the landmarks of the intended hole. For these purposes, you can prepare a template and fix it in advance. It is easy to make a template from an unnecessary cut of wood, by drilling holes in it with the same nozzle that will be used for the tile.
• To cool the drill using ordinary water. It can be poured both on the work surface and in a special container.

IMPORTANT! In the course of work it is necessary to observe safety precautions. In particular, it is not necessary to direct the tip of the drill to the face, since hot oil has the property of expansion and can spill out.

Features of porcelain tiles

The main difficulty in drilling porcelain is that, along with exceptional hardness, the material is very fragile. The following features of the material that have a direct impact on the procedure can be distinguished:

1. exceptional strength;
2. resistance to mechanical damage;
3. resistance to abrasion;
4. a variety of colors and textures;
5. low water absorption coefficient;
6. uniformity;
7. easy to tolerate temperature extremes;
8. resistant to slipping.

REFERENCE! Different types of porcelain tiles can have a hardness of 6 to 8 units on the Mohs scale.

Due to the unique features and durability of porcelain stoneware coatings, they have become very popular. To work effectively with it, you must have special equipment and have specific knowledge. We hope that the recommendations in this article will help to do the work efficiently and quickly.