During the arrangement of the apartment, it is important to choose furniture that will not only fit the interior, but will also be comfortable, high-quality and possibly adjustable. Then it can be configured at your discretion. Very often, people are faced with the need to adjust the hinges on the cabinet doors. Such a function may be needed when moving, when in a different layout things will be arranged in a new way, and just when remodeling an apartment.
Options for adjusting hinges on cabinet doors
There are several options for adjusting loops. All these manipulations are performed quite quickly, even in the absence of skills or experience, because this is a very simple task.To begin with, it is worthwhile to understand all the ways, study each of them and choose the right one for yourself. There are three different adjustment methods:
- vertical;
- door height adjustment;
- on the plane.
Each of them has its own characteristics, which should be considered when choosing.
Vertical adjustment
Usually this method is resorted to when assembling newly acquired furniture or when there is a fair amount of skew, the doors are one above the other and so on.
The first step is to remove the plugs, if any. Bolts near the edge of the sidewall are tightened and placed on the same level. These are parts that perform the function of fastening and ensure the vertical position of the facade of the furniture.
After that, close the door and check its current position. Such an analysis will help to understand which bolt should be tightened. For example, if the upper corner is tilted to the right, then the upper loop should be twisted, and the lower one should be loosened. After each action, it is necessary to evaluate the location of the facade and repeat the procedure until everything is fine.
This completes the vertical adjustment. After it, they usually immediately go on to adjust the height of the door. But it is possible that by studying this method, you decide that you do not need it.
Door height adjustment
Here you should not make mistakes and do everything carefully so as not to spoil the furniture. The height of the door is set using two screws mounted on elongated ears. A loop stretches through them.
The first thing to do is loosen the screws. Then the front part is installed higher or lower, depending on the one you want to see it. After this, the screws are tightened. On this, all the work is over.
IMPORTANT! Before starting the adjustment, select the self-tapping screws with fine thread. With their help, you will be able to set the doors to the required height and in the future do not have problems with this furniture.
Plane adjustment
Thus, it is possible to easily adjust the location of the door in the plane, as well as to fix its loose fit to the cabinet body. It also happens that the door just bounces when you try to use it for its intended purpose. But do not get upset - everything can be changed by performing a few simple steps.
The second bolt, which is located in the hinge, must be turned towards you, and then check for a gap between the cabinet facade and the door. If necessary, the action should be repeated until everything comes back to normal.
ATTENTION! When performing this procedure, it is best to use a Phillips screwdriver. It is also important to be as careful as possible and not damage the bolts, because the consequences can be very deplorable, and it will be difficult to fix them yourself. Then you have to turn to a specialist for help, and this is an extra waste of money.
These three methods are largely different, but at the same time, when using each of them, it is important to follow some general rules. For example:
- Follow the steps to speed up the process and not mix anything up. First, the doors are aligned in height, and then they are already adjusted according to the setting.
- Before starting work, check whether the cabinet is level in all projections. If not, then this arrangement should be achieved, otherwise setting up the loops will be very problematic.
- It so happens that it is impossible to achieve the desired level. In this case, you need to pay attention to the distance between the doors, but it is important that an acceptable amount of things are in the closet at this moment. If it is cluttered, the gap will increase significantly. In normal condition, it should not exceed 5 mm.
- Check and the facade additive under the cup. If it is wrong, then adjustment can be very problematic, because first you have to adjust the hinges, which will significantly slow down the process and may seem like a complicated procedure for those who are not too versed in the design of cabinets.
Maintenance of accessories for long-term operation
In order for the furniture to last longer, it is important to properly care for it. Compliance with several simple rules will help to achieve its high wear resistance, which will significantly save on buying new things or repairing old ones.
So, remember that after completing the settings, all screws should be tightened as tight as possible. So they will not get loose longer, and the whole structure will be stronger. This rule applies not only to the hinges of kitchen and wardrobes, but also to other furniture.
Purchase a special thread lock that needs to be brought to the heads of the adjusting screws. In case of its absence, oil paint or enamel may come in handy.
It may also be that the screws from constant twisting will be broken. Then you have to unscrew them and drive wooden choppers into the holes. After this, the sash should be returned to the hinges.
In caring for the cabinet and hinges with a closer on its doors there is nothing complicated and requiring additional time or money. Engine oil is occasionally dripped onto the movable parts of the hinges in order to not only extend the life of the engine, but also to prevent future unpleasant squeaks or seizures that can ruin the operating experience and annoy. Please note that excess oil should be removed immediately - dust can accumulate on them, and dried grease will look messy.
Now you know not only how to properly adjust the hinges on the cabinet doors, what it is for and how it is carried out, but also about the rules for maintaining furniture that are guaranteed to save you from the constant hassle associated with furniture.
Leave Your Comment