DIY wardrobe

If you need to take advantage of the free space in the room, you can install a wardrobe. This design has become popular due to its functionality.

How to make a DIY wardrobe

The installation of the wardrobe starts with the layout. It is necessary to measure the room. The next step is to create a wireframe. Then the internal filling (rods, shelves and drawers). Then the doors are created. The last step is to create the necessary facade so that the structure fits into the room.

Preparation of tools and materials

The wardrobe can be made from one of the following materials:

1. Lining and wood. They are durable, reliable and environmentally friendly. But still this option is not the best. If the cabinet is installed in a niche, permanent accumulation of moisture will damage the material.
2. Drywall. This material is easy to process. But it cannot be used as a support. The frame must be made of metal.
3. Laminate MDF or fiberboard. At the moment, these materials are considered the best. They were able to preserve in themselves all the advantages of wood (strength and durability). And they are resistant to high humidity.
4. Chipboard. Advantage in the low price of the material. But it does not hold fasteners well and is not environmentally friendly.

To work you need the following tools:

1. Screwdriver.
2. Hacksaw.
3. Roulette.
4. Level.
5. Knife.
6. Staples.
7. Ironing.
8. The square.

Attention! In some cases, other tools may be required during assembly.

How to make measurements

At this stage, drawings must be made. But it’s even better to make a visual model.

First you need to measure the room. If a mounted structure is planned, it is necessary to measure niches or a wall. After that, we proceed to measuring the internal compartments.

Sketching is the most important and difficult assembly step. Most of the errors arise precisely here, because you need to accurately measure the room and the dimensions of the future wardrobe. Any mistake in this step can lead to the fact that the created structure does not fit in the planned place, or is too small.

Attention! If you will assemble the cabinet on the floor, it is necessary to consider an additional 10 cm, otherwise it will not work to install it. This is the distance between the flow and the frame of the room.

There are many ready-made projects that can be found on the Internet. According to them, the average values ​​of cabinets are as follows:

1. Height 2.5 m.
2. Depth 50cm.
3. Width 1.5m.

The dimensions of the cabinet will depend on the ego of operation. If you need a design for storing small household items, a small wardrobe is suitable. If there will be clothes and other things in the closet (possibly household appliances), a large structure is needed. According to this, calculations are made.

As soon as we determine the depth, height and width of the cabinet, we need to measure the doors. It all depends on the calculation of the width of the cabinet. That is, if the width is 1.5 meters, and the thickness of the material is 15 cm, then you need to follow this formula 1500 - 2 * 15 = 1470 - the width of the cabinet doors. The height of the doors must also be measured, but the cap is taken into account here.

Chiffonier yourself: step by step instructions

After we make all the sketches and buy the materials, it is necessary to begin assembling the frame. The base is going first. The bottom must be marked so that all legs of the chiffonier have a uniform load. For mounting the base are used fasteners, which are called dowels. For the structure to be stable, it is necessary that the base rests against the wall.

The next step is to install the side panels. The ends must be sanded in advance to ensure that they fit against the rear wall. The most important thing is to pay attention to the reliability of the wardrobe. To level the side walls evenly, use a level.

Now you need to make the internal filling of the cabinet. We install rods, shelves and boxes. Note. In the process of mounting boxes, you must first install the guiding mechanisms, then the response. Facades will be the last.

The last step is to install the door. You can buy a ready-made furniture board, or you can cut it yourself from a wood board. Installation of doors is an important stage, because it is necessary to take into account the weight and dimensions of the doors. If you make them big and heavy, the cabinet will be difficult to use.

Making a wardrobe yourself is quite simple. Particular attention must be paid to the selection of material and the creation of the sketch.