Parquet board varnish or oil which is better

Parquet board is a fairly popular floor covering. First of all, the wide popularity of the material is associated with its high quality, practicality, attractive appearance, and most importantly - affordable cost. But at the end of laying the coating, the stage of its processing begins. And at the very moment the question arises: “How to cover a parquet board: with oil or varnish?”. That is why in the material below we decided to answer this question.

Advantages and disadvantages of oil and varnish

The varnish coating is characterized by a number of significant advantages.

1. High level of moisture resistance and extremely simple care, consisting in regular processing with a special composition.
2. Long service life, from 10 to 30 years.
3. The ability to perform restoration upon the appearance of visible damage.
4. A wide range of varnishes, from glossy to matte finishes.

But there are certain disadvantages:

1. Over time, the varnish begins to crack (usually after 10 years of operation).
2. Lacquered flooring is not recommended for laying in rooms with high temperature conditions.

The oil coating has the following advantages:

1. Spectacular and natural looking floor that fits into the interior of any room.
2. Oil impregnation is natural, which is why it is an environmentally friendly coating.
3. Extremely easy care and easy restoration.
4. Long service life.
5. Thanks to the oil treatment, the board can be stacked even in rooms with a high level of humidity, as well as in rooms equipped with a floor heating system.

The disadvantages include:

1. The need for more frequent maintenance, compared with parquet, varnished.
2. Operation should be more careful.

Which is better and how do the prices differ?

When choosing between varnish and oil coating, it is necessary to consider in which rooms the parquet will be laid. Cost will not play a special role, because It will be almost at the same mark, and approximately will be about $ 50 per square meter.

REFERENCE! So, in situations when the board is planned to be laid in rooms with high humidity, lack of heating or, on the contrary, the “warm floor” system, it is recommended to give preference to the oil version.

But the varnish coating is recommended to be purchased for rooms with heavy traffic and due to the high wear resistance, as well as for rooms where it is not possible to perform frequent cleaning and clean the surface from contamination.

Take into account all the recommendations indicated above, and make the only right choice. Good luck