The PS3 game console does not provide a wired connection to the joystick. It runs on batteries, which lasts no more than 12 hours. After that, you need to charge. Knowing the different ways of the process will help you choose the most appropriate option.
Ways to charge a joystick without a prefix
Company SONY - is one of the largest representatives of the computer gaming industry. One of its well-known products is the PS3 game console. Fans of computer games are able to spend for many hours in a row. In this model, the connection between the console and the joystick is not using a wired connection, but Bluetooth. Long work leads to the fact that the battery charge of the joystick comes to an end. To continue the work it is necessary to fill it.
When the charge ends, the indicator lights on the device begin to flash. Now you need to charge. This can be done not only by connecting to the console, but in a different way.
Comes with a cord to connect the device to the USB port. With it, the joystick is connected to another device in which there is a corresponding connector. For this purpose you can try to use:
- computer;
- television;
- a laptop.
When connected, it may turn out that in some cases recharging will not occur. In this case, you need to try to connect to different devices. To determine how long it will take to charge, you need to consider that a current of different strengths can pass through USB. The more it is, the less time it will take this procedure.
It is possible to recharge the battery by connecting to the outlet through the device. In this case, it is necessary that it correspond to the joystick on the electrical parameters. The battery is best suited if the voltage is 5 V and the current is 400 mA. Some devices are rated for less voltage than specified here. This will not interfere with the joystick battery recharge procedure, but will only make it slower. Exceeding the 5 V limit is not acceptable. The magnitude of the current can be both less and a little more specified.
You can also use an additional device (for example, PS3 Venom), which will increase the operating time up to 20 hours.
Risks of joystick charge without prefix
If the device used has an output voltage exceeding 5 V, the joystick may burn. Therefore, it is necessary before making the connection, to make sure that this situation is excluded.
Sometimes when connected to devices that have a USB port, battery charging does not start. In this case, you need to try other ways.
What difficulties may arise
If there are difficulties in carrying out charging, then you need to try to apply other available options for its implementation. To do this, try to connect to other devices with a USB port, try using a device with the appropriate parameters.
It should be borne in mind that the process may not begin immediately after switching on. In some cases, the delay may be more than 5 minutes. It is recommended to wait for some time and make sure that the blinking of the indicators has stopped, which indicates that the battery is low.
If no such method worked, you need to check the joystick performance. To do this, it is connected to the included console with the help of a wire. If charging occurs, then it indicates the health of the equipment. Otherwise, you must contact the service center.
Charge the batteries on time. So, you can spend many hours at your favorite console, without fear that the joystick will turn off at the height of the game.
Leave Your Comment