One column does not work on the computer

Speakers and various speakers are designed to produce high-quality sound and achieve the effect of maximum immersion in the atmosphere of a series, movie or computer game. But in order to accomplish this, it is necessary to purchase good equipment and properly configure it. If you are lucky to buy a real branded product, there should not be any problems in its operation. This technique can last for many years.

But sometimes there are situations when the equipment fails or does not work at all. This is a rather unpleasant situation, which leads to a deterioration in the transmitted sound and makes it difficult to enjoy your favorite music. In our article, we will consider an unusual version of problems when there is no connection to one of the connected speakers, and we will also tell you how to solve the problem yourself in this case.

Malfunctions in the operation of one of the columns are quite rare. Most often, the entire speaker system is damaged immediately. If you are faced with just such a situation when only one device does not output sound, you need to understand and determine the location of the malfunction. To assess the condition, we recommend that you pay attention to the following list, which presents the most common options for operational problems:

  1. External defects of the housing and wires as a result of mechanical damage. The wires can be bent and frayed at the bend points.
  2. Damage to the system speakers or the departure of wires, microcircuits from them ...
  3. Incorrect connection of one of the speakers to the USB connector (wired version), lack of Bluetooth pairing or low battery (for wireless versions).
  4. Foreign objects getting into the case: dirt, stones ... Excessive dust pollution is possible.

These reasons are characteristic for the breakdown of one of the columns. Usually, when the system and software are damaged, the entire speaker system is not connected.

IMPORTANT: Sometimes a similar reason can lead to a malfunction of a piece of equipment. For an accurate diagnosis, it is recommended to contact the wizard.

Depending on the level of difficulty, you can repair the equipment yourself or contact the technical support center. If the cause is unknown, first try to check the general condition and perform the following manipulations:

  1. Inspect housing condition and wiring. If damage is found, the cable or panel must be replaced. In some cases, it is necessary to use multimeters to detect hidden wire breakdowns.
  2. Firmly connect the wire to the appropriate connector. For wireless versions, search for and pair with the equipment.
  3. Clean all speakers, paying attention to the speakers. Do not allow moisture, wipe everything with a dry cloth.
  4. If the warranty has already expired, you can try to disassemble the case and inspect the internal condition. Contact your service center to replace speakers and microchips. If the column is already too old, it is better to purchase a new model

Watch the video: Column buckling example problem #3: one end fixed, one end free (March 2024).

Leave Your Comment