How to connect the modem to the tablet android

Some models of tablet computers are not equipped with a special slot for SIM-cards. Therefore, they can not perform the function of Internet access, which is so necessary in modern living conditions. In this case, users are faced with the question of various ways to solve this problem.
Of course, you can still connect via a wireless Wi-Fi network for free access. But in this case you will have to constantly look for a synchronization point or purchase a router home. All this is very inconvenient, since access to the network will be limited. In this case, you can use a modem.

We will tell how to connect the modem to the tablet based on Android.

How to connect

With this method, you can provide free access to the Internet on the device. But before using it, you must install it correctly. For convenience, use the step-by-step connection plan.

• Get a 3G modem with the ability to use the built-in SIM card.
• If you have a special USB input, you can directly connect it to the tablet.
• If the connectors do not match the wires, you canBuy a special adapter for modern device models.
• After that, the program must write a notification that a new device has been detected.

IMPORTANT! If, when using an adapter, the technician does not recognize the connected module, most likely you have an outdated model that does not support this method of equipment pairing. If possible, buy in the store a new version of the tablet.

How to perform the necessary settings

After proper connection of the equipment, it is necessary to set it up correctly. This will allow you to use all the features of technology.

To configure, you will need to perform the following steps in the order shown.

• For the tablet to recognize the device, you need install the program 3G Modem Mode Switcher.

IMPORTANT! There are other utilities for settings. If you decide to choose such a program, download it only from trusted official sources.

• Follow all installation wizard prompts in the dialog box that opens.
• After properly downloading and installing the application on a tablet computer log in to it.
• Then select the value you are interested in for the device operation mode. In this case, you will need to set the "modem only" parameter.